Rear Engine Rider, 108, 130, STX30 decks
These are pictures of the older 30" deck on rear engine riders and the 26" and 28" decks should be similar. Used on older riders like the 60 series, the R series the S series the RX series and the SX series.
The 30" deck, this is the GX30 & SX30 deck.
Old 34" rear engine rider deck, two views. Used on the larger engined R series. Still looking for the later 32" deck
The 38" deck from a rear engine rider Note hanger in center of rear, 3 anti-scalp wheels, idlers and tensioners. Used on the SX and SRX series with the 12.5 HP engine.
The STX 30 deck.
Old Lawn & Garden Tractor decks
Old 39" and 47" decks Note that the double sheave is on the back on one and front on the other. These were used on the old 100, 200 and some 300 series of the 1960s and 1970s.
Old 50" deck that was replaced with a 48" deck if the whole deck was replaced and required a lift arm kit to do it. This was used on the old 300 series of the 1960s and 1970s.
170, 175,180 and 185 Lawn Tractor decks
The deck old lawn tractor, like 160, 165, 170, 175. Note hangers, 3 anti-scalp wheels, idler and tensioner near discharge. Two versions of the deck exist; one with cast iron spindle housings held on by three bolts (top 2 pictures) and aluminum housings held on by four bolts (bottom picture.) Note the difference in the double sheave. Both use electric PTO clutches.
The 46 electric PTO decks, one repainted and one not. The arrow at the top of the discharge says "Width of Cut" and is unique to the 46 and the old 47 decks.